ATP 3" Inlet Pipe Kit - Mazdaspeed3
Shipping calculated at checkout.
High flow 3" inlet pipe kit for MS3 (Mazdaspeed3) turbo engine. Replaces the restrictive "pancaked" inlet pipe between turbo and MAF housing built into the factory airbox. The turbo inlet pipe is the most critical area in the entire intake tract. Many companies make "intake" kits that replace the airbox only or the pre-airbox tube, but fail to address the prior piece, the inlet pipe attached directly to the turbo compressor inlet nozzle, which is often the bottleneck of the entire intake system. A compromised inlet pipe can hold back the entire turbo system from making power to full potential. Examine the molded factory plastic piece and you will find major flow impediments including a small diameter entry leading into a severely pinched shape flowpath. The flow is convoluted to say the least and net flow volume is less than desirable. Our replacement piece which was built to handle the flow requirements of the big Garrett turbo upgrade, is built out nice aluminum casting (Internal and external of inlet tube is tumble polished for maximum flow), formed with smooth transitions to integrate a more desirable flowpath and accomodates much more volume because it’s all 3” throughout. The unit can also be ordered with the proper transition coupler to fit the stock turbo and unleash more power from it. Includes all parts from turbo inlet to your "intake". Specify Garrett 4" inlet or stock turbo 2" inlet. Specify color: black, red, or blue silicone connectors.