0 Item(s) in your cart | Total: $0.00
 | 
Browse


Today's Bestsellers



Info Desk


Your Account
Username:
Password:
Register
Login

Recently Viewed
cc_logos
You are here: Mazdaspeed Parts - Home / MazdaSpeed 3 / MazdaSpeed3 Engine / MazdaSpeed 3 2007-2010 / MazdaSpeed 3 2007-2010 Motor Mounts / Mazda CP-E Mazdaspeed3 xFlex Rear Motor Mount Stage2
  MAZDA CP-E MAZDASPEED3 XFLEX REAR MOTOR MOUNT STAGE2
Part #:
MZXM00003B
Retail Price:
$270.27
Our Price:
$207.90
You Save:
23%
 
Product Options:
Quantity

Add to cart
        

  PRODUCT OVERVIEW

It is well known that the stock rear motor mount on the MS3 is a weak link and cp-e has chosen to think outside the box on this and come up with a completely new design.

FEATURES

  • Billet CNC construction
  • EPDM Bushing to protect rubber from overheating
  • Stainless Hardware
  • Vertically mounted bushing increase's durability.
  • Machined additional pockets to create lightweight but strong mount.
  • Step by step installation directions.

To do this cp-e carefully studied the layout of the stock MS3 Engine Mounts. While designing the side engine mounts it was determined that a better design could be achieved on the rear mount as well.

 

The way the Mazda engine mount system works is that the two side mounts provide a rotational mounting point, if just these two mounts are installed without a lower engine mount the bottom of the engine is free to swing like a pendulum. Now if you take the stock engine mount and put it in place with its horizontally mounted bushing and you apply some power, it will stop the engine from swinging but you are now stressing the bushing in two directions. These types of bushing are not really meant for this.

 

So cp-e came up with a way to stress the bushing in only one direction, by remaking both sides of the engine mount cp-e was able to mount the bushing vertically so now the pendulum affect of the engine is stretching or pushing in only one direction. This also increases the durability of the engine mount substantially.

 

To accomplish this two blocks of aluminum, starting at 15.81 lbs are slowly whittled down over the course of a couple of hours in our CNC machine to a final weight of 3.53 lbs. This process takes a lot of time but was necessary to give our customers what they want.




  CUSTOMERS ALSO BOUGHT

 
Copyright © 2019 Mazdaspeed Parts - Mazda Speed Store | Mazdaspeedstore.com   
MazdaSpeedStore.com is not affiliated, related to, or endorsed by Mazda North America Operations (MNAO) or its parent company, Mazda Motor Corporation (MC) in any way. MazdaSpeedStore.com is an independent retailer of performance parts and accessories that is not affiliated with (MNAO). Use of trademarks is done on a fair use basis and without intent to compete with , or take advantage of MNAO/MC or its trademarks. For more information on MC or MNAO please visit http://www.mazda.com.