Look no further than the all new COBB Tuning Front Mount Intercooler.
The factory top mounted intercooler can easily be over worked and over heated due to its smaller size. In return, the intake air temperatures rise causing a loss in power.
Replacing the factory intercooler with the COBB Tuning Front Mount Intercooler will ensure that your engine is receiving the coolest possible air, allowing you to enjoy more power that is also much more consistent!
One of the more common issues with a front mount intercooler is turbo lag. Our testing shows our core Inlet pressure
at an average of 15.45 psi and the Outlet pressure at an average of 14.8 psi. That results in an averaged pressure drop of
only 0.65 psi, which in turn produces little to no turbo lag at all! We also tested the cooling capacity of our core. With an
ambient temperature of 91 degrees, our Inlet temperature averaged 193 degrees F while our Outlet temperature averaged
95 degrees F. This is an averaged temperature drop of an unprecedented 98 degrees F!
- Bar and plate 24" x 3.5" x 7.9" aluminum core
- 2.5" aluminum tubing powder coated dark Gray
- Blue silicone and t-bolt clamps
- All brackets and fasteners are included
- Some trimming of bumper tabs is required
- Made to fit stock BPV or aftermarket BOV that is stock fitment
- Retains stock bumper beam and does not require cutting the bumper beam
- Undertray can be reinstalled with no modifications
- Does not require disconnecting of the power steering lines
- CFD tested and air flow optimized
Engineered for maximum performance and precise fitment, the purposeful and aggressive looks of the COBB Tuning Front Mount Intercooler will deliver pure driving pleasure!
TECH TIP: We recommend professional or experienced installation as the fitment of the pipes needs to be specific to clear all places of the chassis/engine/transmission.
Fits: Mazdaspeed3 2007-2008
Part # 771600
